Continuous vs Intermittent Inflation: Choosing CID or IID Decoys
Every inflatable decoy has to answer one practical question: how does it stay inflated? The answer shapes how a decoy is deployed, how long it can stay in place, how much support it needs and how quickly it can be moved. MAAN Defence offers inflatable military decoys in two variants that answer the question differently: the MDPL-CID continuous inflating decoy and the MDPL-IID intermittent inflating decoy.
This article explains how each works, their strengths and trade-offs, and how GCC units can decide which is right for a given mission. Many forces find they need both.
Why inflation matters
A decoy's credibility depends on its shape. A sagging turret, a drooping gun barrel or a collapsed hull is an immediate giveaway to anyone watching through a camera or thermal imager. Keeping a decoy correctly inflated is therefore not a detail; it is fundamental.
Inflation is affected by many factors:
- Temperature. Air expands as it warms and contracts as it cools. In the desert, day-night swings can be large.
- Altitude. Lower air pressure at altitude affects inflation.
- Wind. Gusts push on the decoy and can deform it.
- Leakage. All inflatables lose some air over time.
- Damage. Punctures from debris, fragments or handling.
The two inflation approaches deal with these factors in different ways.
MDPL-CID: continuous inflating decoy
How it works
A continuous inflating decoy has a blower that runs constantly while the decoy is deployed. The blower supplies a steady flow of air, maintaining shape and pressure even as conditions change and small amounts of air escape.
Strengths
- Steady pressure. Continuous airflow keeps the decoy firm through temperature swings and wind.
- Tolerance of minor damage. Small leaks are compensated by the blower.
- Long deployments. Suited to decoys that stay in place for extended periods.
- Low supervision. With pressure monitoring and auto control, the decoy can hold its shape without constant attention.
Trade-offs
- Needs power. The blower must run throughout the deployment, so power, typically from a generator, must be available.
- More equipment. Blower and power supply add to the deployment footprint.
- Noise and heat. Running equipment produces some noise and heat, which must be managed. MAAN Defence uses a power-saving silent generator to keep the acoustic footprint low.
Best for
Long deployments with power available on site, such as protecting fixed or semi-fixed positions over days or weeks.
MDPL-IID: intermittent inflating decoy
How it works
An intermittent inflating decoy is inflated, sealed and then topped up when needed. The blower is used to inflate the decoy and to restore pressure periodically, but does not need to run all the time.
Strengths
- Minimal support. Without continuous power, the decoy can be placed where generators are impractical.
- Rapid, dispersed placement. Crews can inflate a decoy, seal it and move on to the next site.
- Smaller footprint. Less equipment stays with each decoy.
- Silence. With no blower running, a sealed decoy makes no noise.
Trade-offs
- Pressure changes. Sealed air expands and contracts with temperature, so pressure varies through the day and night.
- Top-ups needed. Crews must return periodically to restore pressure.
- Less tolerant of leaks. A small puncture will gradually deflate a sealed decoy.
Best for
Rapid, dispersed placement with minimal support, such as creating a wide false picture quickly or deploying decoys in remote locations.
Side-by-side comparison
| Factor | MDPL-CID (continuous) | MDPL-IID (intermittent) |
|---|---|---|
| Blower operation | Runs constantly | Used to inflate and top up |
| Power on site | Required throughout | Needed only for inflation and top-ups |
| Pressure stability | High | Varies with temperature; top-ups needed |
| Tolerance of small leaks | High | Lower |
| Deployment speed across many sites | Good | Very good |
| Equipment left with decoy | Blower and power | Minimal |
| Acoustic signature | Low, with silent generator | None when sealed |
| Typical use | Long deployments with power | Rapid, dispersed placement |
Features common to both
Both MAAN Defence variants share the core design of the decoy itself:
- 1:1 scale to the specified vehicle, including camouflage pattern.
- Visual, thermal and radar signatures.
- Multi-stage air blower, tested for 30 days of continuous deployment cycles.
- Pressure sensors with auto cut-off on inflation and deflation.
- Quick pressure-setting mechanism and valve, including for high-altitude use.
- Auto temperature control to help hold the thermal picture.
- Working temperature of −20 °C to +50 °C, with full UV protection.
- REACH food-grade, chemical-resistant material.
- Three years of shelf life packed, and a one-year warranty against manufacturing defects.
- Option to mount on an unmanned land platform so the decoy can move.
How to choose
Ask the following questions about each mission:
How long will the decoy stay in place?
For long deployments, continuous inflation keeps the decoy looking right without regular visits. For short or frequently changing deployments, intermittent inflation is often simpler.
Is power available?
If generators can be positioned and fuelled, CID is practical. If not, IID avoids the need for continuous power.
How many sites, and how dispersed?
Creating many decoy positions across a wide area favours IID, because crews can inflate and move on.
What are the conditions?
Large temperature swings and strong winds favour CID's constant pressure management. In more stable conditions, IID may need fewer top-ups.
How much crew time is available?
CID needs less attention once running but more equipment. IID needs less equipment but periodic visits.
What acoustic and thermal signatures are acceptable?
CID's running equipment produces some sound and heat, minimised by a silent generator. A sealed IID decoy is silent.
- 1:1 replica of your vehicle and camouflage
- Visual, thermal and radar signatures
- Continuous (CID) and intermittent (IID) variants
- −20 °C to +50 °C, full UV protection
Using both together
Many forces will find a mixed fleet most useful. For example, continuously inflated decoys might protect positions that will be held for longer periods, while intermittently inflated decoys are used to create a wider or rapidly changing picture. Having both gives commanders flexibility to match the decoy to the task.
Desert-specific advice
In the GCC, heat and day-night temperature swings make pressure management especially important:
- For CID, monitor generator fuel and blower intakes, which can clog with dust.
- For IID, plan top-up visits around the times when pressure changes most, typically after sunset and in the early morning.
- For both, inspect fabric, seams and valves regularly, and clean intakes and fittings.
See decoy tanks in desert operations for more practical guidance.
Logistics and training
Whichever variant is chosen, crews must be trained in inflation, sealing, pressure setting, anchoring, inspection and recovery. The quick pressure-setting mechanism on MAAN Defence decoys simplifies on-site adjustment. Setup times depend on configuration and are confirmed in each quotation.
Planning the mix for a procurement
When preparing a procurement, it helps to think about the likely balance of missions over the life of the decoys. Units expecting mostly long, fixed deployments may lean towards CID; those expecting fast-moving operations and wide dispersal may lean towards IID. Many will choose a mix. Sharing the expected deployment profile with MAAN Defence allows the team to recommend quantities, power equipment, spares and training that match how the decoys will actually be used.
Common questions from crews
Crews new to inflatable decoys often ask the same practical questions:
- "What happens if the generator stops on a CID decoy?" The decoy will slowly lose pressure, as any sealed inflatable does over time. Monitoring fuel and power is part of the deployment routine.
- "How often does an IID decoy need topping up?" It depends on temperature changes, wind and any minor leaks. Crews learn the pattern for their conditions and plan visits accordingly.
- "Can a CID decoy be converted to IID use?" Operating practices differ between the two, so it is best to discuss mixed use with MAAN Defence when specifying.
- "How do we know pressure is correct?" Pressure sensors with auto cut-off control inflation, and the quick pressure-setting mechanism lets crews adjust on site.
The cost dimension
Both variants are inexpensive compared with the vehicles they represent. CID adds the running cost of power and fuel over long deployments; IID adds the crew time of periodic top-up visits. Which is cheaper over a deployment depends on duration, distance between sites and the availability of power and crews. A short planning exercise based on expected missions usually shows which variant gives better value for a given unit.
Moving decoys between sites
Whichever variant is used, the ability to deflate, pack and redeploy quickly is part of the value. A CID decoy is recovered by switching off the blower and deflating; an IID decoy is opened and deflated. Both pack down for transport. Practising rapid recovery means units can keep the picture changing, which is one of the most effective ways to stop an observer learning which positions are false.
Frequently asked questions
What is the difference between CID and IID decoys?
CID (continuous inflating decoy) runs a blower constantly for steady pressure. IID (intermittent inflating decoy) is inflated, sealed and topped up as needed.
Which variant needs power?
CID needs power throughout deployment. IID needs power only for inflation and top-ups.
Which is better for long deployments?
CID is generally better for long deployments where power is available, because it maintains pressure continuously.
Which is better for rapid, dispersed placement?
IID, because crews can inflate and seal decoys and move on without leaving power equipment at each site.
Do both variants have the same signatures?
Yes. Both are built 1:1 to the specified vehicle and designed to present visual, thermal and radar signatures.
Tell us your requirement and a MAAN Defence specialist will respond within one business day with configuration options and a formal quotation.
